![background image](http://html1.mh-extra.com/html/barco/dp2k-12c/dp2k-12c_installation-manual_3917263026.webp)
3. Physical installation
How to connect a UPS unit with the projector electronics?
1. Install the UPS unit according to the instructions of the manufacturer and the local regulations.
2. Connect the power output cord (reference 1) from the UPS unit with the UPS INLET socket of the projector (upper socket).
3. Secure the UPS INLET socket using the small
fi
xation plate and two thumbscrews. Use appropriate spacers to ensure that the
plug is captured without play.
4. Install the large
fi
xation plate (reference 2) upon the power OUTLET socket of the projector (lower socket). This to prevent losing
the
fi
xation parts.
1
2
Image 3-12
C
AUTION
:
The electrical connection with the UPS INLET socket of the projector must be done with a certi
fi
ed
AC power supply cord (minimum 0,75 mm² or 18 AWG and minimum 300V)
C
AUTION
:
Do not use the power OUTLET socket of the projector to provide power to other equipment!
20
R5905050 DP2K C-SERIES 10/07/2012
Содержание DP2K-12C
