Barco DP2K-12C, Руководство по установке

Страница: 54 / 111

6. Input & communication
6.2 Local keypad of the DP2K C-series projector
Identi fi cation of the keys
1
2
3
4
5
6
2 1 3 4 5
6
7
8
Image 6-2
Local keypad
1 Marker area for macro name
2 Numeric keyboard
3 Standby key
4 Dowser open/close switch
5 Test pattern toggle switch
6 Lens shift up/down, left/right
7 Lens focus
8 Lens zoom
Numeric keys
All the numeric keys (2) of the local keypad have a blue backlight during normal operation. When the authorization process is
activated with the security key, the backlight color of the numeric keys 1 to 6 changes to orange. Each key can be linked to a macro
which allows you to setup the projector to your requirements with one push of a button. Note that each numeric key has a marker
area (1) where you can write down the name of the macro.
Standby key
Standby key (3) switches ON or OFF the lamp and lamp electronics. The lamp cooling fans remain active for about 5 minutes. The
speed of the other fans is reduced. The backlight color of the standby key remains red in standby mode and changes to green in
operation mode.
Dowser key
The dowser key (4) opens or closes the dowser. The backlight color of the dowser key is green when the dowser is open and red
when the dowser is closed.
Test pattern key
The test pattern key (5) gives you direct access to the internal test patterns of the projector.
Shift keys
The shift keys (6) allow you to shift the lens up/down or left/right. This functionality is only available in case of a motorized lens shift.
Focus keys
The focus keys (7) allow you to focus the projected image on the screen. This functionality is only available in case of a motorized
lens and lens holder.
Zoom keys
The zoom keys (8) allow you to zoom in or out the projected image on the screen. This functionality is only available in case of a
motorized lens and lens holder.
48 R5905050 DP2K C-SERIES 10/07/2012