Barco Coronis Uniti, Руководство пользователя

Страница: 46 / 70

K5902079 /11 Coronis Uniti 46
6.1 Repacking your Coronis Uniti system
How to repack your Coronis Uniti system
1. Insert the connector cover in the small buffer.
Image 6–1
2. Lock the height mechanism at the lowest display position by inserting the hook pin in the back of the stand.
Caution: Make sure that the hook pin is inserted deep enough until only the red part of the pin is
visible.
Image 6–2
3. Remove the tilt lock pin from the back of the display, if this was not yet done during installation.
Repackaging instructions