Barco Coronis Uniti, Руководство пользователя

Страница: 40 / 70

K5902079 /11 Coronis Uniti 40
4. Select one of the available color conversion modes and confirm.
4.26 DisplayPort standard version
About DisplayPort standard version
The Coronis Uniti supports 2 DisplayPort standard versions: DP V1.1 and DP V1.2, the latter providing a
higher video bandwidth.
To select the DisplayPort standard version
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources > Input Settings > DisplayPort 1/2 menu.
3. Enter the Input Interface Standard Version submenu.
4. Select one of the available versions and confirm.
To obtain full resolution and full refresh rate, DP V1.2 should be selected and two DisplayPort video
input cables must be connected to the display.
4.27 EDID timings
About EDID timings
Following EDID timings are available:
• Refresh Rate: Allows to manually select the refresh rate of the image source video input signal depending
on the maximum refresh rate of the display controller connected to your display.
• Color Depth: Allows to change the color depth to 8 or to 10 bit.
To manually set EDID timings:
1. Bring up the OSD main menu.
2. Navigate to the Configuration > Image Sources > Input Settings > DisplayPort 1/2 menu.
3. Enter the EDID submenu.
4. Select Resolution, Refresh Rate, Preferred Orientation or Color Depth .
5. Select one of the available settings and confirm.
4.28 Display info
About display info
Your display serial number, native resolution, firmware versions, etc. are available in a dedicated submenu of
the OSD menu.
To retrieve info about your display:
1. Bring up the OSD main menu.
2. Navigate to the About this Display menu to make the information visible on the screen.
Advanced operation