Barco Coronis Uniti, Руководство пользователя

Страница: 24 / 70

K5902079 /11 Coronis Uniti 24
The SoftGlow lights can also be enabled and configured in the Intuitive Workflow Tools. See the
Barco “Display Controller and Intuitive Workflow Tools” user guide on the included documentation
CD, or at
www.barco.com/support.
3.5 OSD menu
About the OSD menu
The OSD menu allows you to configure different settings to make your Coronis Uniti fit your needs within your
working environment. Also, you can retrieve general information about your display and its current
configuration settings through the OSD menu.
For detailed explanation and instructions about all OSD menu functions, see “Advanced operation”, page 27 .
To access the OSD menu
1. Activate the shortcut bar by pressing any of the front keys (except for the left-most key, which would
activate I-Luminate).
2. Press the front key under the Menu icon ( ). The OSD main menu comes up.
To navigate through the OSD menus
Navigating through the OSD menus can be done by:
• Use the left/right keys to move through the (sub)menus, change values or make selections.
• To go into a submenu or confirm adjustments and selections, use the menu key.
• Use the standby key to cancel adjustments or exit a (sub)menu.
• Exit all OSD menus at once by touching the standby key for approximately 2 seconds.
The key icons are displayed above the keys and are adapted to the function that it is used for (menu
dependent):
Left, Right
Menu
Enter
Cancel
Standby (IEC 60417–5009)
3.6 I-Luminate
About I-Luminate
When I-Luminate is switched on, the LED backlight of the display is boosted to the maximum value, creating
the highest possible luminance.
There are 3 I-Luminate modes:
• Screen: I-Luminate is applied on the entire screen without any overlay.
Daily operation