Barco Coronis Uniti MDMC-12133, Руководство пользователя

Страница: 33 / 60

5. Advanced operation
5.7 SoftGlow Wall light
About the SoftGlow Wall light
The Coronis Uniti is equipped with a SoftGlow Wall light. This allows you to have light on the wall at the
back of your display in a dark environment. The brightness of the SoftGlow Wall light can be adjusted.
To enable/disable the SoftGlow Wall light:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Lights menu.
3. Enter the SoftGlow Wall light submenu.
4. Select Enabled/Disabled as desired and con fi rm.
To adjust the SoftGlow Wall light brightness:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Lights menu.
3. Enter the SoftGlow Wall light brightness submenu.
4. Set a SoftGlow Wall light brightness value as desired and con fi rm.
5.8 DPMS mode
About DPMS mode
Enabling the Display Power Management System (DPMS) mode on your display will optimize its diagnos-
tic lifetime by automatically switching off the backlight when the display is not used for a speci
fi ed period
of time. By default, DPMS mode is enabled on your display, but it also needs to be activated on your
workstation. To do this, go to the “Power options properties” window of your workstation.
Barco recommends setting DPMS activation after 20 minutes of non-usage.
When DPMS mode is enabled on your display, an additional OSD power saving function
becomes available: hibernate. Please refer to "Hibernate", page 32 for more information
on hibernation and how to enable this function.
To enable/disable DPMS mode on your display:
1. Bring up the OSD main menu.
2. Navigate to the Con fi guration > Power Management menu.
3. Enter the DPMS Mode submenu.
4. Select Enabled/Disabled as desired and con fi rm.
K5902079 CORONIS UNITI 21/04/2015 31