![background image](http://html1.mh-extra.com/html/barco/coronis-fusion-4mp/coronis-fusion-4mp_getting-started-manual_3824977039.webp)
General tips
39
To set the resolution of the second display attached to the
BarcoMed display controller you are working with, go back to the
“Settings” tab of the “Display Properties Control Panel”. If
necessary attach the second display you detached in step 2 above,
by right clicking on the rectangle that represents it and selecting
Attached
.
Now repeat steps
5-8
above for this display.
If you are using a Quad-Head Configuration repeat all of the above
steps for the two displays on the second display controller.
Note:
If you have a single display configuration and you have
enabled DualView, Windows will not allow you to attach the
second head. This is normal and not a bug.
After enabling DualView and setting the resolutions in a Quad-
Head Configuration you may need to drag the heads into the
proper position in the window on the
“Settings”
tab, so that the
arrangement in the window on the
“Settings”
tab matches the
physical arrangement of your configuration.
Содержание Coronis Fusion 4MP
