Coronis 5MP
43
T
O
SELECT
A
DISPLAY
FUNCTION
:
1
Bring up the OSD main menu.
2
Navigate to the
Configuration
>
Calibration
menu.
3
Enter the
Display Function
submenu.
4
Select one of the available display functions and confirm.
Ambient Light Compensation (ALC)
A
BOUT
ALC
When ALC is enabled, the DICOM display function will be recalculated
taking a preset ambient light correction value into account. This value is
determined by the selected reading room. Therefore, it is also important
to select a realistic reading room when enabling ALC. This can be done
by following the instructions in
“Reading rooms”
on page 44.
T
O
ENABLE
/
DISABLE
ALC:
1
Bring up the OSD main menu.
2
Navigate to the
Configuration
>
Calibration > Ambient Light
menu.
3
Enter the
Ambient Light Compensation
submenu.
4
Select
Enabled/Disabled
as desired and confirm.
Ambient Light Compensation (ALC) can only be enabled on
your display when the DICOM display function is selected.
Therefore, please refer to
“Display functions”
on page 42 to
correctly set the display function.
Содержание Coronis 5MP Mammo
