Barco Coronis 5MP Mammo, Руководство пользователя

Страница: 26 / 88

26
Coronis 5MP
First time starting up
You are now ready to start up your B
ARCO
C
ORONIS
Display System for the
first time.
1
Switch on your B
ARCO
C
ORONIS
Display as described in “Stand-by
switching” on page 29.
2
Turn on the computer connected to your display.
If you have properly installed your display and display controller, the
Windows start-up messages will appear once the boot procedure is
finished.
Your B
ARCO
C
ORONIS
Display will be running in a basic video
mode at a default refresh rate when first time starting up.
If you are using a Barco display controller, please consult the
user guide delivered with it to install the drivers, software and
documentation. When this is done, your display will
automatically detect the connected video input signal(s) and
apply the correct video mode and refresh rate.