Coronis 5MP
39
Hibernate
A
BOUT
HIBERNATE
Enabling hibernation will not only switch off the backlight but will also
force the display to disable other functionalities so that power
consumption is further reduced to a minimum. This happens after a
specific period of time which can be manually adjusted.
T
O
ENABLE
/
DISABLE
HIBERNATION
ON
YOUR
DISPLAY
:
1
Bring up the OSD main menu.
2
Navigate to the
Configuration
>
Power Management
menu.
3
Enter the
Hibernate
submenu.
4
Select
Enabled/Disabled
as desired and confirm.
T
O
SPECIFY
THE
HIBERNATE
TIMEOUT
:
1
Bring up the OSD main menu.
2
Navigate to the
Configuration
>
Power Management
menu.
3
Enter the
Hibernate Timeout
submenu.
4
Set the timeout value as desired and confirm.
Hibernate can only be enabled on your display when the DPMS
mode is enabled first. Therefore, please refer to
“DPMS
mode”
on page 38 to do this.
Содержание Coronis 5MP Mammo
