Barco CineVERSUM 110, Руководство пользователя

Страница: 28 / 153

3. Connections
Component Video
In Component Video the term component describes a number of elements that are needed to make up the video pic-
ture, these components are PR/Y/PB. A composite video signal on the other hand contains all the information needed
for the color picture in a single channel of information
Which signals can be connected ?
Signals/Input BNC
R
G
B H V
RGBHV R G B H V
RG
s
B
1
R G
s
B
- -
RGBS 1 R G B S
-
Component PR Y PB
- -
Beside the standard RGB, component and sync signals, the extended mode of the 5 Cable input makes pro-
cessing of additional signals possible.
How to select a source on the 5 cable input ?
1. Press 1 on the RCU
Note: Another way for selecting this input is via Source on the local keypad or via the Menu
Component Video signals (PR/Y/PB)
Some interfaces use progressive output signals with a double line frequency of 32 kHz. The video decoder
used for the video signals is not appropriate for these signals since it can only handle 15 kHz signals. This
signal has therefore to be internally redirected, this is done in the
Source selection
menu by selecting
Data on
BNC’s
instead of
Component video
and by selecting
Pr/Y/Pb
in the advanced settings of the
Image file
menu.
3.4 Composite Video Input
Input specifications
The Composite video input section is made of 1 BNC input terminal. Connect Composite video signals from a VCR, OFF air signal
decoder, etc..
1.0 Vpp ± 3dB
75 Ω terminated
No loop through
R/PR G/Y B/PB Hs/Cs Vs VIDEO
SDI
IN
SDI
OUT
S-VIDEO
R.C.
DVI ANALOG RGB RS 232 C
Image 3-7
Composite video indication
1. data or video
24 R5976697 CINEVERSUM™ 110 12/05/2004