Barco CineVERSUM 110, Руководство пользователя

Страница: 107 / 153

12. Image Files Menu
12. IMAGE FILES MENU
Overview
• Overview of the Image Files Menu
• Introduction to image files
• Load file
• Auto Image
• Edit file
• Rename file
• Copy
• Delete
12.1 Overview of the Image Files Menu
Overview
• Load
• File sort
- name
- index
• Auto image
- Limited scan
- Full scan
• Edit...
• Rename...
• Copy...
• Delete...
12.2 Introduction to image files
Introduction
An image file contains the main characteristics of a source (number of active lines,...). The projector’s memory contains a list of files
corresponding to the most common sources, these are the standard files (file extension= *.s). When a new source corresponds to
one of these files, a custom file (file extension=*.C) is created and saved for future use.
The maximum number of custom files that can be created is 99, the four last files are systematically overwritten.
When there is a little difference, the file can also be loaded and then edited until the source specs are reached.
Possible file manipulations
The possible file manipulations are :
•
Load : installation of a file for a new source
• Edit : editing a loaded file to match the source specifications
• Rename : renaming a file
• Copy : copying a file to a new file
• Delete : deleting an existing file
12.3 Load file
How to load a file ?
1. Press MENU to activate the menu bar.
2. Press → to select the
Image files
item. (image 12-1)
3. Press ↓ to pull down the
Image files
menu.
R5976697 CINEVERSUM™ 110 12/05/2004 103