manualshive.com logo in svg

Barco Cine 8, Руководство пользователя

Поделиться
Скачать
Barco Cine 8 Скачать руководство пользователя страница 82

Programmable Function Keys

9-1

5976227 BARCOCINE 8 13042001

9

PROGRAMMABLE FUNCTION KEYS

Programmable Function Keys

What can be done with these keys

The five function keys on top of the remote control can be programmed as short cut keys (quick access) to almost any adjustment
function.
See list futher in this chapter.

How can a Function Key be programmed ?

A function key can only be programmed when in the service menus.

Handle as follow :

1. Scroll through the menus until the desired function is on the menu.
2. Select this function by pushing the cursor keys up or down.
3. Press the desired function key for this function.

The following message : "Programming Function Key Fx" will be displayed.
The message will disappear automatically and the function key is programmed.

4. Leave the adjustment mode by pressing ADJUST.
5. The function key is available in the operational mode.

e.g. programming horizontal phase on key F4.

1. Press 

ADJUST

  to enter the main menu (menu 1).

2. Push the cursor keys 

é

 or 

ê

 to select 'Service menu'.

3. Press 

ENTER

 to go into the adjustment menus.

A warning will be displayed (menu 2).

4. If qualified, press 

ENTER

 otherwise press 

EXIT

 and call for technical assistance.

5. Select Randon by pushing the cursor keys 

é

 or 

ê

 .

6. Press 

ENTER

 to display the Random Access mode menu (menu 3).

7. Push the cursor keys 

é

 or 

ê

 to select 'Geometry'.

8. Press 

ENTER

 to display the Geometry menu (menu 4).

9. Push the cursor keys 

é

 or 

ê

 to select H PHASE (menu 4).

10. Press 'F4' to program this key.
11. Press 

ADJUST

 to return to operational mode.

ADJUSTMENT MODE

Select a path from below :

IRIS

GUIDED

RANDOM ACCESS

INSTALLATION

SERVICE

Source 01

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

menu 1

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

MAIN MENU

Image Control
IRIS Control
Sound Control
Function keys

Service Menus

Select with 

é

 or 

ê

then <ENTER>

<EXIT> to return.

GEOMETRY

H PHASE

RASTER SHIFT

LEFT-RIGHT (E-W)

LEFT SIDE CORRECTION

TOP-BOTTOM (N-S)

V SIZE

V LINEARITY

H SIZE

BLANKING

menu 4

menu 2

WARNING

RISK OF INCORRECT
ADJUSTMENT OF THE
PROJECTOR.

The following
SERVICE menus
are reserved to,
and to be performed only
by qualified personnel !

If qualified, press
<ENTER> to continue, or
if not, <EXIT> to return.

menu 3

Содержание Cine 8
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды