Installation Set Up
4-4 ____________________________________________________________________________ R5975819.05 BARCO CINE 6 21112002
Follow next procedure to check the configuration :
- switch on the projector.
- the projector starts up on the last selected source.
- press the
ADJUST
key.
- highlight
'SERVICE'
with the control disc and press
ENTER
. The
'SERVICE MODE'
will be displayed
- select with the control disc
'PROJECTOR SET UP'
and press
ENTER
. The
'PROJECTOR SET UP'
will be displayed.
- Select with the control disc '
IDENTIFICATION
' and press
ENTER
.
The projector displays the
Identification screen
This screen gives information about the projector configuration in the subject '
config.
'.
MAIN MENU
Image Control
Function Keys
Service Menus
Select with or
then <ENTER>
<EXIT> to return.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 1
Select with or
then <ENTER>
<EXIT> to return.
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with or
then <ENTER>
<EXIT> to return.
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWER UP MODE : operating
COMMON ADDRESS : 0
BARCO LOGO
Select with or
then <ENTER>
<EXIT> to return.
CINE 6
Proj. address
: 001
Soft. Version
: 6.00
Config.
: Ceiling
Front
Baudrate PC
: 9600
Text
: ON
Serial No.
: 103589552
