Barco BARON 908, Руководство по установке

Страница: 31 / 50

Source connections
6 - 5
5976418 BARON 908 04122001
75 W Termination resistors
In case of chaining (loop-through) the projectors, the 75 W line termination resistors must be removed from the second RGB Input
Module when the projector is NOT the last unit in the chain.
In case of a stand-alone projector, do not remove the resistors.
75 W resistors on the module : line terminated.
75 W resistors removed : line not terminated.
Removing the termination resistors
1 Turn off the projector and unplug the projector power cord.
2 Remove the protection plate on top of the electric block.
3 Remove the RGB Input Module from the main frame.
4 Unsolder and remove the resistors.
Blue in green switch
Blue characters are difficult to read, therefore the blue text will be displayed as cyan so that the readability becomes better.
Switch in the ON position : Blue in Green active.
Switch in the OFF position : Blue in Green disabled.
Warning:
Leaving the switch in the ON position will result in abnormal color balance of the projected image.
Force negative sync switch
Switch in the ON position : the sync pulses must be negative.
Switch in the OFF position : the sync polarity will be automatically detected.
How to remove the second RGB module ?
When removing the second RGB module, turn off the projector and unplug the power cord from the wall outlet.
1. Loosen the two bolts on each side of the projector (image 6.8).
2. Lift up the protection plate (image 6.8).
3. The second RGB module is located in slot 4 of the main frame (image 6.8).
4. On both sides of the module, press the module lock (A image 6.8) and lift up the module handle (B image 6.8).
5. Repeat step 4 on the Limo Plus module in slot 3 to disconnect the mini-connector J2 (image 6.8) on this module.
6. Extract the second RGB module out of the main frame.
7. When finished, reconnect mini-connector J2, secure the modules and put back the protection plate.
image 6.8
Removing the second RGB module
Slot 1
Slot 2
Slot 3
Slot 4
J2
B
A
B
A