Barco BarcoReality 909 Split Pack R9040040, Инструкция по эксплуатации

Страница: 36 / 58

Source connections
6 - 2 5976397 SPLIT PACK REALITY 909 09112001
Composite video source to port 1
When is the video input available ?
The video input is only available when the optional d Limo Pro (R9828631) is installed.
Which signals to the video input ?
Composite video signals from a VCR, OFF air signal decoder, etc..
Video input selection
With the RCU : press digit button 1
Note on loop-through
When using the loop-through Video output, then set the termination switch to the 'OFF' position.
75 W Termination switch for video
Terminate the video input of the projector using the 75 W switch next to the video input, when the projector operates alone or when
the projector is the last unit in loop-through configuration.
The switch is set to 'On' : signal terminated
The switch is set to 'Off' : signal not terminated.
S-Video or Video source to port 2
When is the S-Video input available ?
The S-Video input is only available when the optional d Limo Pro (R9828631) is installed.
Which Signals to port 2 ?
Input as S-Video input :
Separate Y-luma/C-chroma signals for higher quality playback of Super-VHS signals.
Input as Video input :
Composite video signals from a VCR, off air signal decoder, etc..
TV Tuner (e.g. Marco Polo)
DVD Source
Audio Out
To next projector
(or to monitor)
VCR
Port on projector
Composit Video
75 Ohm
OFF - ON
VIDEO
PORT 1
image 6.3
Port 1