Barco BarcoReality 908, Руководство по установке

Страница: 42 / 74

6. Source Connections
Input Port # Source Type Selection Keys on the RCU
4/5 RGB with tri level sync
6
7
4/5 Component video with tri level sync
7
8
Table 6-1
Input Port #, Source type and Selection Keys on the RCU
6.2 Composite Video Source to Port 1
When is the Video Input available?
The video input is only available when the Optional D Limo Pro (R9828631) is installed.
Which signals to the Video Input?
Composite Video signals from:
• DVD Source
• VCR
• TV Tuner (e.g. Marco Polo)
Image 6-2
Port 1
Video Input selection
1. Press digit button 1 on the RCU.
Note on loop-through
When using the Video loop-through output, set the termination switch to the ’OFF’ position.
75 Termination Switch for Video
Terminate the Video Input of the projector using the 75 switch next to the Video Input, when the projector operates alone or when
the projector is the last unit in loop-through configuration.
The switch is set to ON Signal Terminated
The switch is set to OFF Signal Not Terminated
Table 6-2
75
Termination switch
6.3 S-Video or Video Source to Port 2
When is the S-Video input available?
The S-Video input is only available when the Optional D Limo Pro (R9828631) is installed.
6. Input signal : R, G and B with separate tri level sync or with tri level sync on green.
7. Input signal : R-Y, Y and B-Y with separate tri level sync or with composite tri level sync.
36 R5976354 BARCOREALITY 908 SPLIT PACK 10092002