Barco BarcoReality 908, Руководство по установке

Страница: 27 / 74

4. Installation Setup
4. INSTALLATION SETUP
Overview
• Connecting the Optical and Electronic Block together
• Scan Adaptation
RISK OF ELECTRIC SHOCK! TURN OFF THE PROJECTOR AND UNPLUG THE POWER CORD!
This installation should only be done by BARCO authorized service personnel.
4.1 Connecting the Optical and Electronic Block together
Preparation to connect the cable tube
1. Loosen both indicated screws on the back of the electronic block. (image 4-1)
2. Remove the protection plate on the back. (image 4-2)
3. Loosen both indicated screws on the back of the optical block. (image 4-3)
4. Remove the protection plate on the back. (image 4-4)
5. Loosen the 4 indicated screws on each side of the optical block. (image 4-5)
6. Loosen the 2 indicated screws on top of the optical block. (image 4-6)
7. Remove the protection plate on the top. (image 4-7)
Image 4-1
Loosen both indicated screws on the back
of the electronic block.
Image 4-2
Remove the protection plate on the back.
Image 4-3
Loosen both indicated screws on the back of the
optical block.
Image 4-4
Remove the protection plate on the back.
Image 4-5
Loosen the 4 indicated screws on each side of the
optical block.
Image 4-6
Loosen the 2 indicated screws on top of the optical
block.
Image 4-7
Remove the protection plate on the top.
R5976354 BARCOREALITY 908 SPLIT PACK 10092002 21