Barco AP20, Руководство по установке

Страница: 9 / 12

1. Fan replacement kit
Image 1-8
2. Remove four 6–32 x 1/2” fl at-head Phillips screws and four 6–32 Keps nuts holding the fan to the chassis.
Image 1-9
3. Remove the fan assembly.
4. Install the new fan assembly, using four 6–32 x 1/2” fl at-head Phillips screws and four 6–32 Keps nuts.
Note: New screws and nuts for this are included in the kit, as existing hardware may be covered in old Loctite.
Make sure that the wires and arrows indicating air fl ow direction are in the correct orientation.
Image 1-10
5. Connect the fan power cable to the front panel board socket CN1. The connector is keyed to go into the socket in only one
direction.
R59770891 AP20 & AP24 FAN REPLACEMENT KIT 28/09/2015 5