![background image](http://html1.mh-extra.com/html/barco/3300dlc/3300dlc_owners-manual_473872047.webp)
9-5
Service Mode
5975119A BARCODATA 3300DLC 121098
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to
return
.
Panel Adjustments
Changing these settings may seriously affect the perform-
ance of the projector.
All panel adjustments are factory adjusted. If not really necessary,
do not touch one of these adjustments. They are useful when a new
panel is installed.
Highlight Panel Adjustments by pushing the control disc up or up and
press
ENTER
When Panel Adjustments is selected in the Service Mode selection
menu, the following warning will be displayed :
Risk of electrical shock. Panel Adjustments is reserved to qualified
service personnel.
If you are not qualified, press EXIT to cancel the panel adjustments.
WARNING
PANEL ADJUSTMENTS
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
Preset Input Balance
Changing these settings may seriously affect the perform-
ance of the projector.
Highlight Preset Input Balance by pushing the control disc up or down
and press
ENTER
When Preset Input Balance is selected in the Service Mode selection
menu, the following warning will be displayed :
Preset Input Balance is reserved to qualified service personnel.
If you are not qualified, press EXIT to cancel the preset input balance.
SERVICE
BARCO LOGO
PANEL ADJUSTMENTS
PRESET INPUT BALANCE
I2C DIAGNOSIS
MORE...
BARCO LOGO
STATUS : ON
BACKGROUND : ON
SHIFT
HOT KEY : TEXT
Select with or
then <ENTER>
<EXIT> to
return
.
BARCO logo
The BARCO logo can be added to the image, in overlay or on a
background, on any place on the screen.
To add the BARCO logo or to change a setting in the BARCO logo menu,
highlight 'BARCO logo' by pushing the control disc up or down and
press
ENTER
to select.
The BARCO logo menu will be displayed on the screen. Within this
menu, three toggle settings and a shift control are available.
STATUS [ON/OFF]
ON : BARCO logo will be displayed on the screen.
OFF : No BARCO logo displayed on the screen.
BACKGROUND [ON/OFF]
ON : BARCO logo will be displayed on a black background.
OFF : BARCO logo will be displayed without any background.
SHIFT
By pushing the control disc up, down, to the left or to the right, the
BARCO logo can be positioned anywhere on the screen.
HOT KEY [TEXT/OFF]
OFF : no key on the RCU is used to display the BARCO logo.
TEXT : the TEXT key on the RCU is used to display or to remove the
BARCO logo with one single push on this key (only in operational
:mode).
SERVICE
BARCO LOGO
PANEL ADJUSTMENTS
PRESET INPUT BALANCE
I2C DIAGNOSIS
MORE...
SERVICE
BARCO LOGO
PANEL ADJUSTMENTS
PRESET INPUT BALANCE
I2C DIAGNOSIS
MORE...