Barbieri Spectro LFP qb, Руководство по эксплуатации

Страница: 10 / 52

10
Spectro LFP qb - Operating Manual
USB connection
If you use the USB connection, please verify below if a USB driver in-
stallation is necessary.
Installing the USB driver on a Mac computer under OS X
Switch off the Spectro LFP qb.
Download and run the "Barbieri Gateway software installer" and follow
the instructions.
The installer will detect your operating system version and if necessary
install the required USB driver.
• for Max OS 10.11 and newer: no driver installation is necessary. It
comes already with the necessary AppleFTDI driver
• for Mac OS 10.10 and earlier: the necessary FTDI driver is installed
Check if driver is correctly installed
• Switch on instrument
• Open “System Information” (About this Mac/ More info...)
• Show the “System Report” and check “Hardware/ USB”. The
instrument “Spectro LFP qb” must be listed
Installing the USB driver on a PC with Microsoft Windows 7 or newer
There are two drivers to be installed for the connection between your
computer and Spectro LFP qb:
A. High speed USB to serial converter
B. USB virtual serial port driver
Switch off the Spectro LFP qb.
Download and run the "Barbieri Gateway software installer" and follow
the instructions.
The installation procedures are guided automatically by an installation
wizard.