background image

 48

Spectro LFP qb - Operating Manual

EG-Konformitätserklärung

Für das folgend bezeichnete Erzeugnis
 

 

Spectrophotometer Spectro LFP qb

wird hiermit bestätigt, daß es den wesentlichen Schutzanforderun-
gen entspricht, die in der Richtlinie des Rates zur Angleichung der 
Rechtsvorschriften der Mitgliedsstaaten über die elektromagnetische 
Verträglichkeit (89/336/EWG) festgelegt sind.
Diese Erklärung wird verantwortlich für den Hersteller:
 

BARBIERI electronic OHG

 

I. Seidner Str. 35

 

I-39042 Brixen (BZ)

 Italien
abgegeben durch den gesetzlichen Vertreter: Barbieri Markus.

Federal Communication Commission Notice

This equipment has been tested and found to comply with the limits for 
a Class A digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause 
harmful interference in which case the user will be required to correct 
the interference at his own expense.

CAUTION:

 Operational hazard exists if AC adaptor other than original 

is used. 

NOTE:

 Shielded interface cables must be used in order to maintain 

compliance with the desired FCC and European emission requirements.

Содержание Spectro LFP qb





















































Отзывы: