4
4 Safety, Assembly & Instruction Manual
POL FITTING
5/8” SAE THREAD
Barbeque
CONNECTION TO
REGULATOR
GAS CYLINDER
CONNECTION TO
REGULATOR
B. PRECAUTIONS
DO NOT OBSTRUCT ANY AIRFLOW PATH OR VENTILATION PATHS OF THE BARBEQUE
•
Do not obstruct any ventilation ports on the body or the hood of the barbeque.
•
The gas cylinder must be securely placed on the gas cylinder hook as supplied.
•
The gas cylinder must be kept out of direct sunlight and away from any heat sources.
•
During a gas cylinder swap or re-fill ensure that all control knobs are in the “
OFF
” position and
there are no naked flames in close proximity.
•
Gas hoses must NOT be twisted, kinked or under any form of tension. The gas hoses should hang
freely with no bends, folds, or kinks.
•
No part of the flexible hose should come into contact with any part of the barbeque that will
become hot during operation.
•
A regular inspection of the hose should be made to ensure that it is not cracking, breaking,
cutting or deteriorating in any other way.
•
Any damage to the hose requires an immediate replacement from your local agent or gas expert.
C. SIDE BURNER CONNECTION (IF FITTED WITH SIDE BURNER):
•
The side burner hose has already been fitted to the gas pipe-work on the
RIGHT HAND
side of
the main body.
•
The side burner connection is a
‘STANDARD RIGHT-HAND THREAD’
. A standard right-hand
thread is tightened in a
‘CLOCKWISE DIRECTION’
.
•
It is important that the side burner hose is not kinked, twisted or distorted.
•
The hose is already attached to the side valve, however this connection should be checked before
igniting the barbeque.
D. GAS CYLINDER CONNECTION:
•
Check that all the control knobs (including side burner) are in the “
OFF
” position before any
attempt is made to connect the regulator to the gas cylinder.
•
Double check that the gas cylinder valve is securely in the “
OFF
” position before attempting to
connect the regulator to the gas cylinder.
• When
making the connection of the regulator to the gas cylinder, it is important to note that the
regulator
fitting
is
‘LEFT HAND THREAD’
. A left hand thread is tightened in an
‘ANTI-CLOCKWISE
DIRECTION’
.
•
Should there be any concern in making the correct regulator connection please contact after
sales support helpline mentioned at the end of this manual.
