background image

14

USE  AND  CARE  INSTRUCTIONS

Side Burner Lighting Instructions

Failure  to  replace  a  faulty  hose,  secure  gas  supply
connections  or  to  open  the  Lid  before  proceeding  to
the  Lighting  Procedures  could  result  in  a  fire  or
explosion  that  could  cause  serious  bodily  injury,  death,
or  property  damage.

    WARNING

!

!

Set  Control  Knobs  to  OFF  and  open  the  LP  Gas  tank
valve 

SLOWLY 1/4 of a full turn

. For Natural Gas open

the Shut Off Valve at the source.

Push  and  turn  the  control  knob  to  HI/      and  press  the
electric  ignitor  3  to  4  seconds  to  light  the  burner.

5.

6.

8.

7. If ignition does not occur in 5 seconds, turn gas off at

source  and  turn  Control  Knobs  OFF.  Wait  at  least  5
minutes for gas to clear, then retry.  If your side burner
still fails to light turn the burner Control Knob(s) and gas
source OFF and conduct a leak test of ALL gas connec-
tions  and  gas  sources  as  explained  in  the  Use  and
Care section of this guide. If no leaks are detected, wait
5  minutes  for  any  gas  to  clear  and  repeat  the  lighting
procedure.

After one Burner is lit, turn the tank valve SLOWLY one
more 1/4 of a turn.

Before each use, check all hoses for cracks, nicks, cuts,
burns,  or  abrasions.  If  a  hose  is  damaged  in  any  way,
do  not  use  your  side  burner  before  replacing  the  hose
with  an  authorized  part  from  the  Parts  List.  Also  make
sure all  gas supply  connections are  securely tightened.
Familiarize  yourself  with  the  Safety  and  Use  and  Care
instructions  in  this  Guide.  Do  not  smoke  while  lighting
side  burner  or  checking  gas  supply  connections.
Be  sure  the  LP  Gas  tank  is  filled.
Open  the  Side  Burner  Lid.

1.

4.

3.

2.

Manually  Lighting  Your  Side  Burner  By  Paper
Match

Rear  Burner

Front  Burner

Note:  The  Lighting  Stick  is  placed  in  the  Grease  Tray.

To light your gas side burner by match, insert a match into
the Lighting Stick and follow steps 1 through 5 of the Side
Burner  Lighting  Instructions.  Then,  light  the  match  and
place  Lighting  Stick  through  the  Pot  Support  on  the  side
burner as shown below. Turn the  nearest Control  Knob to
the  HI/      setting  to  release  gas.  The  Burner  should  light
immediately.

Open  LP  Gas  tank

OFF

HI/

MID

OFF

MID

HI/

LO

LO

Содержание Grand Turbo BGTSBLP





















Отзывы: