Barbeques Galore ALFRESCO Series, Инструкция по сборке и эксплуатации

Страница: 12 / 41

Page 12
Assembly instructions (continued)
STEP 9: Adjusting the Door Gap.
STEP 10: Attach the Firebox. (Use two people for this step)
WHAT YOU NEED:
one x Firebox & hood assembly (1)
four x M6*12mm screws (B)
four x M6 washers (F)
a) Place the firebox and hood assembly
(1) onto the cabinet, then carefully
open the hood while holding the
assembly steady.
b) Fix the firebox onto the cabinet from
inside the firebox with four M6
washers (F) and M6*12mm screws
(B).
Fully tighten all screws.
B x four
F x four
There are 2 adjustable screws
on each door hinge, use them to
adjust the door gap if required.
Note: It is better to wait until the
unit is fully assembled and in
position before finally adjusting
the doors.