Barbco TRIBOR 36, Руководство по эксплуатации

Страница: 35 / 47

PRESSURE LIMITERS- The transmitter is ON and Active. Master Thrust and Rotation Brakes are off.
The Pressure Limiters are always on when the drill is active. Limiter set points are displayed with the blue
bars on the pressure scales as shown above. Maximum pressure are identified by red bars.
1- Adjusting the thrust and rotation set points-
a. Push the Rotation Limiter Button in and hold.
b. Use the Up and Down Arrow Buttons at the bottom of the display in the corresponding
direction until the desired pressure setting is obtained.
c. Pressure limiters are set.
d. To set the thrust limiter repeat steps a. thru c.
32 Operation
Limiter Set Points
Max Set Points
Thrust Limiter
Button
Rotation Limiter
Button
Adjustment Buttons