barbas 90-60 PF2 Скачать руководство пользователя страница 45

Страница: 45 / 84

5.2.10

Build the fireplace

Safety conditions

Warning:

Do not cover the top side of the appliance with brickwork, plates or

any other material.

Caution:

• Remove the door (including glass). See

6.2

• Remove the frame to prevent damage of the frame during work. See

6.2

• Make sure that the gas piping remains free of cement or other building

material. Otherwise, the gas piping can start to leak.

• Make sure that brickwork is build with a clearing of at least 3 mm between

the sides and top of the appliance and the brickwork. The appliance can
expand during operation due to heating.

• Do not use masking tape on the appliance. Masking tape can damage the

finish of the appliance.

• Do not build the brickwork higher than the casing without the use of a

mantel iron.

Note:

• Make sure that the front opening of the appliance remains entirely free of

building materials. The glass plate must remain easy to dismantle and
mount.

• Make sure that the thickness of any plastering is taken into account when

making the brickwork.

• If you use other material than bricks, install the material in accordance with

the instructions of the supplier of the material.

Procedure

Identify the positions where the inlet openings and the outlet openings, for the AirBox
inserts or the grates, must be put. See chapter

and refer to the preparation manual.

Build the brickwork around the appliance up to the upper frame.

If applicable, install a mantel iron.
a) Put ceramic felt on the top of the mantel iron. Brickwork can be built on top of

the ceramic felt.

Build the fireplace around the appliance.

Install the AirBox inserts or the grates, on the inlet openings and the outlet openings.

Make sure the overpressure hatches are placed correct. Refer to chapter

5.3.1

for

instructions.

Install the glass pane. See

6.2

a) Hidden Door
b) Hidden Door +
c)

Floating Frame

d) Floating Frame +

Install the frame on the appliance. See chapter

6.2

Installation

Gas Fire Front 90-60

Содержание 90-60 PF2





















































































Результаты поиска

Содержание 90-60 PF2

Отзывы:

Похожие инструкции для 90-60 PF2

Бренды по названию

Популярные бренды

barbas 90-60 PF2, Руководство по установке и обслуживанию

Результаты поиска

Содержание 90-60 PF2

Отзывы:

Похожие инструкции для 90-60 PF2

Бренды по названию

Популярные бренды