INSTALLATION (Day5)
A hammer or mallet may be needed during assembly.
5
Figure4
Figure5
U6
U4
U3
U4
assembled
U1
U2
A
U3
Playing
Court
Front side
Back
side
Place the Pole on the Anchor system.
Slide one Thick washer M16 (U3) over
each J-bolt (U2). Lift the Pole (A) onto
Anchor system, secure with one thick
washer (U3), one Lock washer M16 (U6)
and one Hex nut (U4) for each J-bolt.
See
Figure 4.
If the Main Post (A) is not exactly
vertical, adjust the 16mm J-Bolt Hex
Nuts (U4) located under the Post base
(A). Tighten all of the Hex Nuts (U4)
Above Post base when Main Post (A) is
vertical.
NOTE: Face the Main Post (A) with Actuator
Bracket facing away from playing court (as
shown in FIGURE 5).
1.
Attach Actuator mounting plate (E) to Pole (A).
Secure Actuator mounting plate to the bracket welded on backside
of Pole (E) with 2 Hex bolts M12x35 (#7), one Hex bolt M12x105mm
(#5), 6 Flat washers M12 (#8), 3 Lock nuts M12 (#9). See
.
Figure 6
Tighten all three nuts.
2.
Figure6
A
E
5
8
7
8
8
9
8
7
8
9
E
