Barazza B120 M Series Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 25

Barazza B120 M Series Скачать руководство пользователя страница 12

12

1)  NUT
2)  GASKET
3)  JOINT

- Connecting gas

-

Ensure that it has been adjusted to local fuel types.

-

If it has not been adjusted, follow adjustment instructions as set out in
‘Adjustments for alternative gas types’.

-

If it is to be fuelled by liquid gas, only a certified and approved pressure
regulator is to be used.

-

Connect the appliance to gas cylinder or other gas supply in accordance
with local codes and regulations.

- Connecting appliance

-

The hob can be installed with either an approved stainless steel flexible
pipe or a rigid pipe.

-

Connection is made to the GJ1/2” threaded elbow.

-

The gasket has to guarantee the connection holds fast.

-

The elbow can be turned by releasing the nut. Once the desired position
has been established it is to be tightened again.

The  123  cm.  cooker  with  the  fry  top  is  equipped  of  two  separated  entrances  for
the gas: one for burners and another one for the fry top.
Both  must  be  connected  to  the  gas  installation  in  accordance  with  the  current
regulations:  for  more  information  about  this,  see  the  chapter  called  “Gas
connection”.

Important:

After installation check there are no leaks by using a soap
solution and never a flame.

The manufactured declines every responsibility if these safety

standards are not respected.

Fig. 7

«
...
10
11
12
13
14
...
»

Содержание B120 M Series


























Отзывы:

Нет отзывов