23
When the grease
filters have to be
cleaned, the letter
on the display.
AUTOMATIC CONTROL OF GREASE FILTERS
The electronic controls with display allow automatic control of the grease filters so that the user
does not have to remember when maintenance was last carried out.
Grease filters
The grease filters should last for 40 working hours of the motor. After this time in the display
you have the letter flashing and appearing in alternative to the running speed.
When the motor is stopped, the flashing
will appear again.
RESET TO ZERO OF THE COUNTERS
When the is flashing, and the motor is off, you can press the
+
button.
The will disappear issuing an acoustic signal and you can do then all cleaning or replacing
operations.
To have access to the clean function without flashing, you can press the
+
push button in a
long way for 3 seconds when motor is off. You can clean and at the same time the counter for
grease filters is reset to zero.
MAINTENANCE
Grease filters
The metallic grease filters are positioned on the bottom of the hood and are used to contain any
grease which is normally emitted in cooking fumes, thereby impeding the deterioration of the
motor.They can be washed either by hand or in the dish washer.
For washing by hand, use hot water and soap; this can be done by hand brushing vigorously
several times and then rinsing under the tap.
After washing, the grease filters should be dried and re-fitted correctly.
It is possible that after washing the filter will have slight change in the colour.
The color change does not affect the functioning or the healthiness of the filter.
It is advised to wash the grease filters after circa 40 hours of use of the cooking top.
If the grease filters are very dirty, the motor can only take in a small quantity of air, and
performance is reduced;
The grease which accumulates on dirty filters is easily inflammable and
can cause fires,
if they
are not removed by periodic washes.
The manufacturer declines any responsibility for fires caused by poor maintenance of the grease
filters.
Never dismantle grease flters with motor on.
Never switch aspiration on without mounted grease filters.
The company declines any responsability should the above quoted warnings are not respected.
CLEANING
To preserve the hood in good condition, clean this periodically following the advice given as
follows.
Make sure that power has been completely turned off.
Содержание 1PZP9N
