Barazza 1PIDZ90, Руководство по установке

Страница: 35 / 44

27
The electrical connection can only be carried out by qualified professional personnel, using
standard material and state of the art installation methods. The manufacturer declines any
responsibility for installations carried out by unskilled persons and for installations which are not
in conformity with the standard norms concerning electrical safety (both concerning methods
and materials).
ELECTRICAL TECHNICAL DATA
The electrical technical data are visible in the rating plates of the products
CONNECTION TO THE POWER SUPPLY
If a direct connection to the mains is required, an omnipolar switch must be installed, with a
minimum 3 mm opening, between the contacts and suitable for the load indicated on the plate
and in compliance with current standards (the yellow/green earth wire must not be interrupted by
a switch).
When the appliance has been installed, the omnipolar switch must be easily reachable.
PRECAUTIONS TO BE TAKEN IF REPAIRS ARE TO BE
CARRIED OUT
Repairs, including the replacement of the feed cable if necessary, are to be carried out only by
qualified personnel, using standard methods, instruments and materials. Any repairs carried out
by others could be dangerous and could be a fire risk.
INDUCTION HOB USE AND MAINTENANCE
The appliance is operated using the control panel sensor keys. Functions are controlled by
touching the sensor keys and con
ἀ
rmed by displays and acoustic signals. Touch the sensor keys
from above, without covering other sensor keys.
A On/Off
key
A1 LED On/Off key
B [+] key (increment)
C [-] key (decrement)
D Lock key
E Zone Selection key
F Cooking zone Display
G Timer Display
H LED active function/zone