Barazza 1KCYP9, Инструкция по эксплуатации и обслуживанию

Страница: 29 / 52

29
es
29
en
Grease filter
(Only for Filtering Version)
*
CAUTION! It is recommended to use
the recycling version ONLY with a gas-
powered hob.
Retains grease particles produced during
cooking. Excess liquids shall be frequently
removed from filters - or whenever cooking
preparations involve the boiling of liquids-
and filters must be cleaned once a month (or
when the filter saturation indicator system - if
your model is provided with it – signals it to be
necessary), with non-aggressive detergents,
either hand- washed or washed in the
dishwasher at low temperatures and on a short
cycle. When washed in the dishwasher the
metal grease filter may fade, but it will not affect
its filtering performance in any way.
Activated charcoal filter (Recycling version
only)
Retains unpleasant odors produced during
cooking. The charcoal filter must be replaced
every two months (or when the filter saturation
indicator system - if your model is provided with
it- signals it to be necessary).
Lamp replacement
The hood is equipped with a LED technology-
based lighting system , which ensures perfect
lighting lasting up to 10 times longer than
traditional lamps and allowing for considerable
energy savings. For lamp replacement, please
contact the technical assistance service.
Anti-condensation function/feature
This hood has been designed to minimize
condensation of water vapor due to the cooking
/ boiling of liquids on an electric hob equipped
with induction technology. CAUTION! To
obtain the best results, we recommend to use
the hood in the extraction mode (external
discharge of cooking fumes) with a 150mm
diameter exhaust pipe. and start operating it at
least at the third speed. It is also recommended
to operate the hood at first speed at least 10
minutes before starting cooking foods that
involve boiling of liquids and leave it on at
third speed at the end of your preparation,
for at least 10 minutes. Exhaust pipes with
smaller diameters, non-smooth internal walls,
changes in duct section or elbow bends
could reduce the anti-condensation function/
feature effectiveness . A low voltage electrical
resistance is coupled to the bottom of the
glass panel ; this results in a slight heating of
the same in the related area. The resistance
starts operation when the motor is operated.
CAUTION! Ambient temperatures below
20 ° C, may reduce effectiveness of the
anti-condensation function/feature.
Hood installation
The hood must be installed by qualified
personnel, by two or more people (excessive
weight) and with all the personal protective
equipment required by current regulations.
For the product installation sequences, follow
the figures on page 5 on page 19.
Operation of the controls
Use a higher speed (3rd-4th) to obtain better
results in terms of anti-condensation or in case
of high concentrations of cooking fumes and
vapors. It is advisable to run the hood at least
5 minutes before starting to cook and to leave
it on for at least 15 minutes from the end of
cooking.
Control panel
A.
Hood lighting ON / OFF button
(independent of motor operation). When you
press ON, the edge of the button lights up.
B.
Motor speed decrease key. Each press
decreases the engine speed by turning off the
edges of the speed indicator keys.
A B C D E