20
DISPLAYED MESSAGES
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
FILL TANK
•
The water tank is empty or
positioned incorrectly.
•
Fill the tank with water and/
or insert it correctly, push-
ing it as far as it will go.
GROUND TOO FINE ADJUST
MILL alternating with PRESS
OK
•
The grinding is too fine and
the coffee is delivered too
slowly.
•
The machine cannot make
coffee as there is air in the
hydraulic circuit.
•
Turn the grinding adjust-
ment knob one click clock-
wise towards “7”.
•
Press the
button (B9)
and deliver water from the
cappuccino maker
EMPTY GROUNDS
CONTAINER
•
The grounds container (A4)
is too full or more than 3
days have passed since you
first made coffee (this guar-
antees correct hygiene of
the machine).
•
Empty the grounds con-
tainer and clean, then re-
place.
Important: when removing
the drip tray, the grounds
container MUST be emp-
tied, even if it is not com-
pletely full.
If this is not done, when you
make the next coffees, the
grounds container may fill
up more than expected and
clog the machine.
INSERT GROUNDS CON-
TAINER
•
After cleaning, the grounds
container has not been re-
placed.
•
Open the service door and
insert the grounds con-
tainer.
ADD PRE-GROUND COFFEE
•
The “pre-ground coffee”
function has been selected
without placing any pre-
ground coffee in the funnel.
•
The funnel (A21) is blocked.
•
Extract the appliance and
place pre-ground coffee in
the funnel.
•
Empty the funnel with the
help of a knife as described
in the section “Cleaning the
pre-ground coffee funnel”.
