Baotian BT49QT-12 Tanco, Руководство пользователя

Страница: 16 / 26

Brake fluid level
• It has been filled with the special brake fluid
before the motorcycle leaves the factory. Fluid
should only ever be replace or filled with DOT4
brake fluid. Never replace or mix other fluids,
otherwise it will damage the brake system.
• If the brake fluid level is insufficient, it might be
possible for air to enter into the brake system and
result in brake failure
8. Tyres
Insufficient tyre pressure increases wear to them
and affects the riding stability. Please check the tyre
pressure and tread depth when carrying out regular
maintenance.
• Tyre pressure: front 250 KPa, rear 250 KPa.
• Tread depth: It is suggested to replace a tyre
when the tread depth is less than 1.6mm.
13
Warning:
◆ Brake fluid is a corrosive material. It causes
damage to all painted material.
◆ If fluid is sprayed on the skin or eyes, it should
be washed immediately with clean cold water
and medical advice sought.
Warning:
◆ The standard tyre is 120/70-12 56J for front
and 130/70-12 58J for rear tyres. Another type
of tyre may cause instability
◆ Tyre inflation pressures and the general tyre
condition are extremely important to the
performance and safety of the motorcycle.