4. Spark plug
• Clean the carbon deposit on the spark plug with a
piece of hard wire or steel needle.
• Adjust the gap to 0.6-0.7mm with a feeler gauge.
• Use A7RC when replacement is needed.
5. Fuel
Always refill with unleaded petrol.
Try to refill before the needle reaches the red
zone of the gauge.
6. Engine oil
Replace the engine oil with engine warmed up.
Remove the oil dipstick.
Remove the oil plug for displacement to drain the
used oil.
Reinstall the oil plug for displacement, paying
attention to be tightened .
Refill 0.8 L recommended fresh engine oil.
⑤
Fasten all the nuts and screws.
11
Содержание BT49QT-12 Tanco
Страница 1: ...BT49QT 12 Tanco User Manual Service Schedule History...
Страница 20: ...17...