Baoli EP16-N01, Руководство по техническому обслуживанию

Страница: 27 / 67

27
Only when the battery charging right, the right of the LED lights up.As the battery charged condition, leds
light up in turn, but only on one at a time.

On the left side of the second LED lights flashing, suggests that "energy storage" (70% of the
depth of discharge).

Two most on the left side of the LED lights flashing, indicate
“
battery is empty
” (
80% of the
depth of discharge)
。
c.
CHARGING

Can only be used with the charger.

Before using the charger, please fully understand the
content of the charger on the instruction manual

Charge the room must ensure that the well ventilated

Fully charged situation can only view from the discharge
display. To control this situation, it is necessary to interrupt
the charging process and launch vehicles
Will provide a dedicated power supply vehicle parked in a special
security area.
Lower pallet fork, removal of the goods.
Shut down the vehicle power supply, connect the spring line and power
supply.
Charging is complete, disconnect the connector from the socket, and put it in the designated bags.
REGULAR MAINTENANCE

Only qualified personnel are allowed to repair or to rechange the battery, please be sure to
follow the manual instructions and battery manufacturers

Before maintenance, please fork removed the goods from the goods and the goods fork fell to
the lowest position

For vehicles, please according to the fourth chapter using the specified binding equipment or
lifting equipment. Homework before, please put the safety devices (such as specified jack, wedge or
wood) to prevent the accidental fall under cars, mobile or sliding

Please pay attention to maintenance the handle bar. Through the compression, the pressure of
a gas spring has pre-installed. Careless easy to cause harm

Use approved and dealers distribute the original spare parts

Please consider the hydraulic oil leakage may cause machine failures and accidents

Allow only trained maintenance technician to adjust pressure valve

If you need to change the wheels, please follow the above instructions.

Castor must be round and no abnormal wear and tear. Check the maintenance list of key
projects.
Figure.15: Battery recharging