Using the Operator Settings
38
4.3.1 I/O Test
In the page of
[I/O Test]
, you can run the testing for specific I/O application to see if it
is normally functioning. Well-sensed devices will display in red or the sensed value:
1
Enter
[Operator Settings]
>
[Hardware Test]
>
[I/O Test]
.
2
Enter the page of
[I/O Test]
, you can run the testing for a specific application as
explained in the chart below.
I/O applications
Testing method
Testing results
Coin
Insert coins to the coin
slot machine
Well-sensed devices will
display in red, but poorly-
sensed ones will remain in
white.
Test
Press the corresponding
button
Service
S / BOOST( )
[Up]
Press the corresponding
direction button
Well-sensed devices will
display in red, but
poorly-sensed ones will
remain in white.
[Down]
[Left]
[Right]
Sensor
Lean or place your hand
on top of the sensor
Throttle
Turn the throttle
Neutral position is 0.000
Full throttle is around 1.000
Left brake
Right brake
Release/ Hold the brake
When brake is released, the
value is around 0.000, and
when the brake is pressed,
the value is around 1.000.
Tilt axis
Leaning the motorcycle
to the left/ right
When leaning to the left end,
the value is around -1.000,
and leaning to the right end,
the value is around 1.000.
Hardware Test
