Baofeng DM-5R, Руководство пользователя

Страница: 29 / 35

User Manual of DM
‐
5R Two
‐
way Radio
digital menus shall be accessed and operated in digital channel, as detailed below:
Menu
number Display
character
Function description
Display character of
secondary menu
Instructions for setting of secondary menu
1 TXP Transmitting power
HIGH High power transmitting
LOW Low power transmitting
2 SAVE Power saving mode
OFF Deactivate the power saving mode
1 Power saving in 1:1 way
2 Power saving in 1:2 way
3 Power saving in 1:3 way
4 Power saving in 1:4 way
3 VOX
Voice-operated
transmitting
OFF
Deactivate voice-operated transmitting;
when voice-operated transmitting is
activated, transmitting can be executed just
by shouts without pressing PTT key.
1,2,…,10
Sound pressure level for activating of
voice-operated transmitting
4 ABR
Automatic
backlight
OFF Deactivate automatic backlight
ON Activate automatic backlight
5 TDR
Dual-frequency
waiting
OFF Deactivate dual-frequency waiting
ON Activate dual-frequency waiting
6 BEEP Prompt tone switch
OFF Deactivate operation prompt tone
ON Activate operation prompt tone
7 TOT Time-out time 15,20,…,600
The number is in a range from 15 to 495
and increases in step of 15, indicating the
maximum transmitting time after pressing
PTT key.
8 VOICE Prompt language
OFF Deactivate prompt language
ON Activate prompt language
9 SC-REV
Scanning recovery
mode
TO
Time scanning mode means continuing the
scanning 5 seconds after finding the signal
CO
Carrier scanning mode means continuing
the scanning after the signal that is found
disappears
SE
Search scanning mode means stopping
scanning after finding the signal
10 ANI-ID
Inquiry of ID of this
two-way radio
Used for inquire the ID code set in this
two-way radio (The ID code can only be
written via frequency writing software) .
11 MDF-A
A channel display
mode
FREQ
In segment A channel mode, the channel is
displayed by way of frequency.
CH
In segment A channel mode, the channel is
displayed by way of channel number.
NAME
In segment A channel mode, the channel is
displayed by way of channel name
(Specific name is set in frequency writing
software)
12 MDF-B
B channel display
mode
FREQ
In segment B channel mode, the channel is
displayed by way of frequency.
CH
In segment B channel mode, the channel is
displayed by way of frequency.
NAME
In segment B channel mode, the channel is
displayed by way of channel name
(Specific name is set in frequency writing
software)
13 BCL
Busy channel
lockout
OFF
Allow transmitting even if the channel is
occupied.
ON
Prohibit transmitting if the channel is
occupied.
14 AUTOLK
Automatic keyboard
lock
OFF Deactivate automatic keyboard lock
ON Activate automatic keyboard lock function