Baofeng DM-5R, Руководство пользователя, Страница: 26 / 35

User Manual of DM
‐
5R Two
‐
way Radio
Menu
number
Display
character Function
description Display character of
secondary menu
Instructions for setting of secondary menu
0 SQL Squelch level 0,…,9
The lower the squelch level is, the more
susceptible to interference the two-way radio is;
the higher the squelch level is, the less sensitive
the two-way radio is; thus, a middle value shall
be preferably set.
1 TXP Transmitting power
HIGH High power transmitting
LOW
Low power transmitting * In channel mode,
switch power by pressing # key
2 SAVE Power saving mode
OFF Deactivate the power saving mode
1 Power saving in 1:1 way
2 Power saving in 1:2 way
3 Power saving in 1:3 way
4 Power saving in 1:4 way
3 VOX
Voice-operated
transmitting
OFF
Deactivate voice-operated transmitting; when
voice-operated transmitting is activated,
transmitting can be executed just by shouts
without pressing PTT key.
1,2,…,10
Sound pressure level for activating
voice-operated transmitting
4
N
Channel
bandwidth
NARR Narrowband operating
5
ABR
Automatic
backlight
OFF Deactivate automatic backlight
ON Activate automatic backlight
6 TDR
Dual-frequency
waiting
OFF Deactivate dual-frequency waiting
ON Activate dual-frequency waiting
7 BEEP Prompt tone switch
OFF Deactivate operation prompt tone
ON Activate operation prompt tone
8 TOT Time-out time 15,30,…,600
The number is in a range from 15 to 600 and
increases in step of 15, indicating the maximum
transmitting time after pressing PTT key.
9 R-DCS Receiving DCS
OFF No CTCSS
D023N,…,D754I Standard sequence of DCS
10 R-CTCS Receiving CTCSS
OFF No CTCSS
67.0Hz,…,254.1Hz
Standard sequence of CTCSS; meanwhile, the
standard or non-standard CTCSS can be entered
via the keyboard directly.
11 T-DCS Transmitting DCS
OFF No CTCSS
D023N,…,D754I Standard sequence of DCS
12 T-CTCS
Transmitting
CTCSS
OFF No CTCSS
67.0Hz,…,254.1Hz
Standard sequence of CTCSS; meanwhile, the
standard or non-standard CTCSS can be entered
via the keyboard directly.
13 VOICE Prompt language
OFF Deactivate prompt language
CHI Prompt in Chinese
ENG Prompt in English
14 SC-REV
Scanning recovery
mode
TO
Time scanning mode means continuing the
scanning 5 seconds after finding the signal
CO
Carrier scanning mode means continuing the
scanning after the signal that is found
disappears
SE
Search scanning mode means stopping scanning
after finding the signal
15 ANI-ID
Inquiry of ID of this
two-way radio
Used for inquire the ID code set in this two-way
radio (The ID code can only be written via
frequency writing software).
16 MDF-A
A channel display
mode
FREQ
In segment A channel mode, the channel is
displayed by way of frequency.
CH
In segment A channel mode, the channel is
displayed by way of channel number.
NAME
In segment A channel mode, the channel is