Baofeng DM-5R, Руководство пользователя

Страница: 14 / 35

User Manual of DM
‐
5R Two
‐
way Radio
1) Select analog channel, switch to VFO mode by pressing [VFO/MR] key, is displayed on the screen.
2) In frequency mode, make A/B frequency pointer points to A (uplink frequency point) by pressing [A/B] key.
3) Make the two-way radio operate in UHF band by pressing [BAND] key.
4) Adjust the frequency to 440.500MHZ by pressing numeric keys 4,4,0,5,0,0 in turn, is displayed on the screen.
5) Power setting: Select power (HIGH/LOW) as HIGH by pressing [MENU]
→
2
→
[MENU]
→
[

] or [

], then return to the menu
→
[MENU],
→
[MENU]
→
[

] or [

], then return to the
menu
→
[MENU],
7) DCS receiving setting: Select CTCSS value D031N by pressing 10
→
[MENU]
→
[

] or [

], then return to the menu
→
[MENU],
·After received DCS is set, the CTCSS receiving is turned off automatically; in the same way, after received CTCSS is set, the
received DCS is turned off automatically. If it is needed to set CTCSS: Select CTCSS value by pressing [MENU]
→
11
→
[MENU]
→
[

] or [

],then return to the menu
→
[MENU],
8) DCS transmitting setting: Select CTCSS value D031N by pressing 12
→
[MENU]
→
[

] or [

], then return to the menu
→
[MENU],
·After transmitted DCS is set, the transmitted CTCSS is turned off automatically; in the same way, after transmitted CTCSS is
set, the DCS transmitting is turned off automatically. If it is needed to set CTCSS: Select CTCSS value by pressing [MENU]
→
13
→
[MENU]
→
[

] or [

],then return to the menu
→
[MENU],
·The CTCSS can be entered through keyboard directly in which case both of standard CTCSS and non-standard CTCSS can be
selected, or set by [

] or [

] key in which case only standard CTCSS can be selected.
9) Storage setting for the receiving and transmitting of channels in the same frequency:
9.1) By pressing 23, the screen shows and the pointer points to MEMCH, the screen shows .
9.2) By pressing [MENU] key, voice prompt "store channel" is issued and the screen shows ,
9.3) By pressing [

] key or [

] key, select forward or backward the idle channel, and the screen shows .
9.4) By pressing [MENU] key, voice prompt "receiving storage" is issued, and the screen shows .
9.5) By pressing [MENU] key, voice prompt "transmitting storage" is issued, and the screen shows ;
9.6) By pressing [EXIT] key, return to frequency mode.
If it is needed to set relay function, storage setting for the receiving and transmitting of channels in different frequencies
10.1) By pressing [MENU]
→
23, the screen shows ,
10.2) By pressing [MENU] key, voice prompt "store channel" is issued and the screen shows ,
6) Bandwidth setting: Select channel bandwidth (NARR) as NARR by pressing 5