Bante932 Benchtop Water Hardness Meter
9
Temperature Compensation
In order to get accurate measuring results, we recommend that the standards and samples should be measured at the same temperature. If you need to
enable the temperature compensation, follow the steps below.
Automatic Temperature Compensation
Connect the temperature probe to the meter (Refer to page 5
“Connecting the
Temperature Probe
”)
. The ATC icon immediately appears on the display, the
meter is now switched to the automatic temperature compensation mode.
Manual Temperature Compensation
If the meter does not detect a temperature probe, the ° C icon will show on the display indicating that the meter is switched to the manual temperature
compensation mode. To set the temperature value of sample, follow the steps below.
1.
Press and hold the
o
C
key for 3 seconds to enter the temperature setting mode.
2.
Press the
or
key to modify the temperature value.
3.
Press the
Enter
key to confirm.
Press the
or
key once, the setting value will increase or decrease by 0.1. Press and hold the
or
key, the setting value will increase or
decrease by 1.
ATC
°C
