background image

+

-

+

-

+

-

+

-

+

-

+

-

Display

LiPo[0]  FAST  CHG
2.0A         11.1V(3S)

+

-

+

-

Display

'FAST'  charging Lithium battery

 You can set up the charging current and the 
voltage of the battery pack being charged. As 
you press ‘ENTER/START’ button the voltage 
confirmation will be displayed. And then, if you 
confirm the voltage and current, press 
‘ENTER/START’ button again to start charging.

This shows the present state of 'FAST' 
charging. To stop charging arbitrary, press 
‘TYPE/STOP’ button once.

Current
voltage of
battery

charge
current

supplied
capacity

elapsed
time

TYPE

STOP

DEC

INC

ENTER

START

DEC INC

 The charging current is getting smaller as the process goes to the near end 
term of Lithium battery charging. To finish charging process earlier, this 
program eliminate certain term of CV process. Actually, the charging current 
will goes to 1/5 from the initial value to end the process while the normal 
charging goes to 1/10 at end of CV term. The charging capacity may be a bit 
smaller than normal charging but the process time will be reduced.

 This is for charging or discharging Lithium battery not to be used for the time 
being. The program will determine to charge or discharge the battery to the 
certain voltage depending on the voltage of the battery at its initial stage. They 
are different from the type of the battery, 3.7V for LiIo, 3.8V for LiPo and 3.3V for 
LiFe per cell. If the voltage of battery at its initial stage is over the voltage level 
to storage, the program will start to discharge first.

 

You can set up the current and the voltage of 
the battery pack to be charged. The current will 
be used for charge or discharge the battery to 
reach the 'storage' level of voltage.

Display

+

-

+

-

Display

charge

or

discharge

current

TYPE

STOP

DEC

INC

ENTER

START

DEC INC

'STORAGE' control Lithium battery

Li3S   2.0A   12.59V
FAS  022:43  00682

number
 of
cells

Li3S   2.0A   12.59V
STO  022:43  00682

LiPo[0]   STORAGE
2.0A         11.1V(3S)

Current
voltage of
battery

supplied
capacity

elapsed
time

number
 of
cells

                                             

 

 

- 12 -

   

                                        

+

-

+

-

+

-

+

-

+

-

+

-

-

+

-

+

-

-

+

-

+

-

+

-

+

-

!

!

!

Содержание e-STATION BC6HP






















Отзывы: