+
-
+
-
+
-
+
-
+
-
+
-
- 9 -
+
-
+
-
+
-
+
-
+
-
+
-
-
+
-
+
-
-
+
-
+
-
+
-
+
-
The beep sounds at every time pressing the buttons
to confirm your action. The beep or melody sounded
at various times during operation to alert different
mode changes. These audible sounds can be on or
off.
This program monitors the voltage of input battery.
If the voltage drops below the value you set the
operation forcibly terminated to protect the input
battery.
Display
Key Beep ON
Buzzer ON
INC
DEC
-
+
DEC
INC
Display
Input power low
Cut-Off 10.0V
-
+
DEC
INC
Display
Program Memory
Display
BC6HP can store the setting data of every program for your convenience. This
feature can store up to 10 battery data for each type of batteries by number that
represents the individual parameters.
They can be called back for the process of charging or discharging without setting
up the program again.
Select the data number using ‘INC’ or ‘DEC’
button. Each data had been stored by their last
setting. Then, press ‘START/ENTER’ button to
enter the program.
Or, press ‘TYPE/STOP’ button to go for other
program.
PROGRAM MEMORY
LiPo [0]
ENTER
START
Display
PROGRAM MEMORY
LiPo [0]
TYPE
STOP
TYPE
STOP
+
-
DEC
INC
LiPo[0] CHARGE
12.0A 11.1V(3S)
!
!
Battery connection to charger
All batteries are charged should be connected through the main
charge leads go to output port of charger. The balance
connection which goes to balance port is only required when
running ‘Balance’ program.
!
INC
DEC
Display
Back-light
100%
-
+
DEC
INC
You can adjust the brightness of LCD screen at the
charger.
