2x
1x
Unlock push buttons
(flashing of both Green and Amber LEDs 1X followed by acceptance flash)
default
Lock push buttons
(flashing of both Green and Amber LEDs 2X followed by acceptance flash)
4x
3x
Enable Auto compensation
(flashing of both Green and Amber LEDs 3X followed by acceptance flash)
Disable Auto compensation
(flashing of both Green and Amber LEDs 4X followed by acceptance flash)
default
5x
Enable 30 ms Off Delay
(flashing of both Green and Amber LEDs 5X followed by acceptance flash)
6x
Disable 30 ms Off Delay
(flashing of both Green and Amber LEDs 6X followed by acceptance flash)
default
1x
2x
Basic Configuration (alternating flashing Green and Amber LEDs at 1Hz)
Advanced Configuration (simultaneous flashing of both Green and Amber LEDs at 1Hz)
Starts Selected Teach
(same function as pressing Teach Button for > 2 sec)
40 ms < T < 800 ms
Timing between Pulse groups > 800 ms
Remote Input Wire Pulse Timing (T)
(White wire is remote input wire)
3x
Toggle TEACH Button Lock/Unlock (flashing of both Green and Amber LEDs 4X followed by acceptance flash)
4x
Reset to Factory Defaults
** Remote Input Wire only.
(flashing of both Green and Amber LEDs 8X followed by acceptance flash)
8x
Push Button or
Remote Input Wire*
*Configuration using remote input wire
when enabled through IO-Link
1x
Second Pulse Completes Teach (Two-Point Static and Dynamic Teach only)
High Speed (flashing of both Green and Amber LEDs 1X followed by acceptance flash)
Configure to A Frequency (flashing of both Green and Amber LEDs 2X followed by acceptance flash)
Configure to B Frequency (flashing of both Green and Amber LEDs 3X followed by acceptance flash)
Configure to C Frequency (flashing of both Green and Amber LEDs 4X followed by acceptance flash)
Configure output to Light Operate (flashing of both Green and Amber LEDs 5X followed by acceptance flash)
Select Two-Point Static TEACH
(flashing of both Green and Amber LEDs 1X followed by acceptance flash)
Select Dynamic TEACH
(flashing of both Green and Amber LEDs 2X followed by acceptance flash)
Select Window SET
(flashing of both Green and Amber LEDs 3X followed by acceptance flash)
Select TEACH/SET Method (flashing Amber LED at 1Hz)
Select Light SET
(flashing of both Green and Amber LEDs 4X followed by acceptance flash)
Select Dark SET
(flashing of both Green and Amber LEDs 5X followed by acceptance flash)
2x
1x
4x
3x
5x
5x
2x
1x
4x
3x
5x
default
default
default
Configure offset percentage to 30% (flashing of both Green and Amber LEDs 7X followed by acceptance flash)
Configure output to Dark Operate (flashing of both Green and Amber LEDs 6X followed by acceptance flash)
Configure offset percentage to 50% (flashing of both Green and Amber LEDs 8X followed by acceptance flash)
6x
8x
7x
Hold is > 2 sec. and < 4 sec.
Click is > 40 ms and < 800 ms
Push Button Input
**
**
** Remote Input Wire only.
Select Opaque Mode
(flashing of both Green and Amber LEDs 6X followed by acceptance flash)
default
6x
RECEIVER
Figure 11. Opposed-Model Models Receiver Input Flowchart
3.1 IO-Link Interface
IO-Link is a point-to-point communication link between a master device and sensor. Use IO-Link to parameterize sensors
and transmit process data automatically.
For the latest IO-Link protocol and specifications, see
.
Each IO-Link device has an IODD (IO Device Description) file that contains information about the manufacturer, article
number, functionality etc. This information can be easily read and processed by the user. Each device can be
unambiguously identified via the IODD as well as via an internal device ID. Download the QS18E's IO-Link IODD package
from Banner Engineering's website at
IODD package part numbers:
• Self-contained models: 199851
WORLD-BEAM QS18 Expert with IO-Link
www.bannerengineering.com - Tel: + 1 888 373 6767
11
