Banner T30RW, Инструкция по эксплуатации

Страница: 26 / 43

June 23, 2023
T30RW R-GAGE Washdown Radar Sensor Instruction Manual
26
Continued from page 25
Setting Factory Default
On Delay 0 ms
Off Delay 500 ms
Discrete 2 Tab Default Settings
Setting Factory Default
Output Mode Switch Point
Setpoint 1 15.0 m (49.2 ft)
Hysteresis 0.05 m (2 in)
NO/NC Normally Open
On Delay 0 ms
Off Delay 500 ms
Using Measurement Hold Example
Measurement Hold (The hold time is set to 1 second)
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
D
is
ta
n
c
e (m)
Time (s)
A
B
C
1 sec
D
Raw Measurement
Output Measurement
Maximum Distance Decrease
Maximum Distance Increase 1 sec
<1 sec
0 1 2 3 4 5 6 7 8 9 10
A.
The Max Distance Change threshold (red lines) adapts based on the previous Raw Measurement sample (blue
lines) as long as that sample was within the previous thresholds.
B.
The temporary distance spike in the Raw Measurement (blue lines) is filtered out because the distance increase
was outside of the Max Distance Change (red lines). The Output Measurement (green lines) will hold its last
measurement.
Continued on page 27
© Banner Engineering Corp.