background image

R70SR SNAP SIGNAL™ Serial Data Radio

June 23, 2023

page 

9


DX80 Performance Wireless I/O Network Instruction Manual: 

132607

  

MultiHop Data Radio Instruction Manual: 

151317

  

Specifications for the R70xR Models

Radio Range

900 MHz, 500 mW: Up to 1.6 km (1 mile) (internal antenna)

2.4 GHz, 65 mW: Up to 1000 m (3280 ft) with line of sight (in­

ternal antenna)

Antenna Minimum Separation Distance

900 MHz, 500 mW: 4.57 m (15 ft)
2.4 GHz, 65 mW: 0.3 m (1 ft)

Radio Transmit Power

900 MHz, 500 mW: 27 dBm
2.4 GHz, 65 mW: 18 dBm (65 mW) conducted, less than or 
equal to 20 dBm (100 mW) EIRP

Spread Spectrum Technology

FHSS (Frequency Hopping Spread Spectrum)

Communication Protocols

Modbus® RTU, Modbus/TCP, EtherNet/IP™ 
EtherNet/IP™ is a trademark of ODVA, Inc.

Modbus®

 is a reg­

istered trademark of Schneider Electric USA, Inc.

 

Security Protocols

TLS, SSL, HTTPS 

900 MHz Compliance

Radio module is indicated by the product label marking
Contains FCC ID: UE3RM7023: FCC Part 15, Subpart C, 
15.247

Contains IC: 7044A­RM7023 

2.4 GHz Compliance (SX243 Radio Module)

Radio module is indicated by the product label marking
Contains FCC ID: UE3SX243: FCC Part 15, Subpart C, 
15.247
Radio Equipment Directive (RED) 2014/53/EU
ETSI/EN: EN 300 328 V2.2.2 (2019-07) [RED HarmStds]
Contains IC: 7044A-SX243

ANATEL: 03737­22­04042   

Radio Data Transfer Rate

 

900 MHz: 300 kbps

 

 

2.4 GHz: 250 kbps

 

Supply Voltage

 

10 V DC to 30 V DC

 (

Outside the USA: 12 V DC to 24 V DC, 

± 10%

For European applications, power this device from a Limited 

Power Source as defined in EN 60950­1. 

Average Current for 900 MHz Radios (1500 byte packets at 50 ms 

intervals)

 Client Mode: 0.12 A at 12 V; 0.06 A at 24 V
 Server Mode: 0.03 A at 12 V; 0.017 A at 24 V 

Average Current for 2.4 GHz Radios (1500 byte packets at 50 ms 

intervals

 Client Mode: 0.035 A at 12 V; 0.02 A at 24 V
 Server Mode: 0.022 A at 12 V; 0.014 A at 24 V

Interface

Two bi-color LED indicators

 

One button

 (under the small round cover)

Construction

Base: Black polycarbonate
Cover: Translucent gray polycarbonate

Operating Conditions

 –40 °C to +85 °C (–40 °F to +185 °F)
 

95% maximum relative humidity (non-condensing)

Radiated Immunity: 

10 V/m (EN 61000-4-3)

Operating the devices at the maximum operating conditions 
for extended periods can shorten the life of the device.

Environmental Ratings

IP65

 

For installation and waterproofing instructions, go 

to 

www.bannerengineering.com

 and search for the complete 

instruction manual

Shock and Vibration

All models meet IEC 60068-2-6 and IEC 60068-2-27 testing 
criteria
Shock: 30G 11 ms duration, half sine wave per IEC 
60068-2-27
Vibration: 10 Hz to 55 Hz, 0.5 mm peak-to-peak amplitude per 
IEC 60068-2-6

Certifications

Banner Engineering BV
Park Lane, Culliganlaan 2F bus 3
1831 Diegem, BELGIUM

(CE/UKCA approval only applies to 2.4 GHz models)

Dimensions for the R70SR 

 

All measurements are listed in millimeters, unless noted otherwise.

 

© Banner Engineering Corp.

Содержание Sure Cross R70SR Series















Отзывы: