R70SR SNAP SIGNAL™ Serial Data Radio
June 23, 2023
page
13
•
•
•
•
•
•
Exporting Sure Cross® Radios.
It is our intent to fully comply with all national and regional regulations regarding radio frequency emis
sions.
Customers who want to re-export this product to a country other than that to which it was sold must ensure the device is approved in
the destination country.
The Sure Cross wireless products were certified for use in these countries using the antenna that ships with the prod
uct. When using other antennas, verify you are not exceeding the transmit power levels allowed by local governing agencies. This device has
been designed to operate with the antennas listed on Banner Engineering’s website and having a maximum gain of 9 dBm. Antennas not in
cluded in this list or having a gain greater than 9 dBm are strictly prohibited for use with this device. The required antenna impedance is 50
ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen such that the equivalent
isotropically radiated power (EIRP) is not more than that permitted for successful communication. Consult with Banner Engineering Corp. if
the destination country is not on this list.
IMPORTANT:
Never operate a 1 Watt radio without connecting an antenna
Operating 1 Watt radios without an antenna connected will damage the radio circuitry.
To avoid damaging the radio circuitry, never apply power to a Sure Cross® Performance or Sure Cross Multi
Hop (1 Watt) radio without an antenna connected.
IMPORTANT:
Electrostatic discharge (ESD) sensitive device
ESD can damage the device. Damage from inappropriate handling is not covered by warranty.
Use proper handling procedures to prevent ESD damage. Proper handling procedures include leaving devices
in their anti-static packaging until ready for use; wearing anti-static wrist straps; and assembling units on a
grounded, static-dissipative surface.
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of ship
ment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the
factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the
improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUD
ING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER
ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BAN
NER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES,
LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT
DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE,
TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or lia
bilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installa
tion of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes
will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the prod
uct warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications
or update documentation at any time. Specifications and product information in English supersede that which is provided in any other lan
guage. For the most recent version of any documentation, refer to:
For patent information, see
www.bannerengineering.com/patents
.
FCC Part 15 Class A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc
tion manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Industry Canada Statement for Intentional Radiators
This device contains licenceexempt transmitters(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
Cet appareil contient des émetteurs/récepteurs exemptés de licence conformes à la norme Innovation, Sciences, et Développement
économique Canada. L’exploitation est autorisée aux deux conditions suivantes:
This device may not cause interference.
1.
This device must accept any interference, including interference that may cause undesired operation of the device.
2.
L’appareil ne doit pas produire de brouillage.
1.
© Banner Engineering Corp.
