June 23, 2023
page
12
R70SR SNAP SIGNAL™ Serial Data Radio
•
•
•
•
•
•
•
•
•
•
•
•
•
5Pin Threaded M12 Splitter Tee
Model
Description
Pinout (Male)
Pinout (Female)
CSB-M1250M1250-T
Female trunk, 1 female branch, 1 male
branch
1
4
5
3
2
1 = Brown
2 = White
3 = Blue
2
3
4
1
5
4 = Black
5 = Green/Yellow
LMB30LP
Low profile
30 mm mounting hole
300 series stainless steel
2 X Ø5.5
Ø30.5
65
50
40
26
WC-R70
Washdown Cover
FDAgrade silicone
Fits R70 data radios
IP67 and IP69K rated
PSW-24-1
24 V DC, 1 A Class 2 UL Listed power supply
100 V AC to 240 V AC 50/60 Hz input
2 m (6.5 ft) PVC cable with M12 quick disconnect
Includes Type A (US, Canada, Japan, Puerto Rico, Taiwan), Type C (Germany, France, South Korea, Netherlands,
Poland, Spain, Turkey), Type G (United Kingdom, Ireland, Singapore, Vietnam), and Type I (China, Australia, New
Zealand) AC detachable input plugs
TYPE A
TYPE G
TYPE C
TYPE I
Warnings
WARNING:
Do not use this device for personnel protection
Using this device for personnel protection could result in serious injury or death.
This device does not include the selfchecking redundant circuitry necessary to allow its use in personnel safe
ty applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output
condition.
IMPORTANT:
Please download the complete
R70SR Snap Signal Serial Data Radio
technical documentation, available
in multiple languages, from www.bannerengineering.com for details on the proper use, applications, Warnings, and in
stallation instructions of this device.
IMPORTANT:
Por favor descargue desde www.bannerengineering.com toda la documentación técnica de los
R70SR
Snap Signal Serial Data Radio
, disponibles en múltiples idiomas, para detalles del uso adecuado, aplicaciones, adver
tencias, y las instrucciones de instalación de estos dispositivos.
IMPORTANT:
Veuillez télécharger la documentation technique complète des
R70SR Snap Signal Serial Data Radio
sur
notre site www.bannerengineering.com pour les détails sur leur utilisation correcte, les applications, les notes de sécu
rité et les instructions de montage.
Install and properly ground a qualified surge suppressor when installing a remote antenna system.
Remote antenna configurations installed
without surge suppressors invalidate the manufacturer's warranty. Keep the ground wire as short as possible and make all ground connec
tions to a single-point ground system to ensure no ground loops are created. No surge suppressor can absorb all lightning strikes; do not
touch the Sure Cross® device or any equipment connected to the Sure Cross device during a thunderstorm.
© Banner Engineering Corp.
