Original Instructions
June 23, 2023
p/n: 233275 Rev. A
233275
R70SR SNAP SIGNAL™ Serial Data Radio
•
•
•
•
•
R70SR Features
Sure Cross® R70SR Serial Data Radios are compact, industrial, low-power wireless communications devices used to extend the range of
serial communications networks. The Serial Data Radios are available in two frequencies, 900 MHz and 2.4GHz, and are fitted with M12
quick disconnect connectors for fast deployment.
For additional information, updated documentation, and a list of accessories, refer to Banner Engineering's web
site,
.
RS485 serial communication
Star or tree network topology configuration
DIP switches select operational modes
Frequency Hopping Spread Spectrum (FHSS) technology ensures reliable data delivery
Self-healing, auto-routing radio frequency network with multiple hops to extend the network's
range
R70SR Models
Models
Frequency
Transmit Power
R70SR9MQ
900 MHz ISM Band
1 Watt
R70SR2MQ
2.4 GHz ISM Band
65 mW (100 mW EIRP)
Quick Start Guide
Setting Up Your Data Radio Network
To set up and install your wireless Data Radio network, follow these steps:
Buttons and LEDs
Binding button, LEDs, and DIP switches
Binding button
LEDs
Before installing your data radios, verify that your serial devices work. Connect your serial devices using a serial cable.
1.
Configure the DIP switches of all devices.
2.
Apply power to all devices.
3.
Form the wireless network by binding the repeater and peripheral radios to the controller/primary radio.
4.
Observe the LED behavior to verify the devices are communicating with each other.
5.
(p/n 151514) downloadable from the Wireless Reference Library at
© Banner Engineering Corp.
