Contents
Performance Gateways and Nodes
1.3 DX83 Ethernet Bridge Overview
2.1 DX80 Gateway and Node Components
2.2 DX80 Gateway and Node Wiring Chamber
2.5.1 Apply Power to the Gateway or Node
2.5.3 Industrial Ethernet Wiring
3 Setting Up Your Wireless Network
3.1 Mixing Performance and Non-Performance (150 mW) Radios in the Same Network
..................................................................13
3.2 Apply Power to the Gateway or Node
3.3 Bind Radios to Form Networks
3.4 LED Behavior for the Gateways
3.5 LED Behavior for the Nodes
3.6 Conducting a Site Survey (Gateway and Nodes)
3.6.1 Conduct a Site Survey Using the Menu System
3.6.2 Conduct a Site Survey from a Gateway Board Model
3.6.3 Conduct a Site Survey Using Modbus Commands
3.6.4 Interpreting the Site Survey Results
3.6.5 Improving Your Site Survey Results
4.1 Mounting SureCross Devices Outdoors
4.1.1 Watertight Glands and NPT Ports
4.2 Other Installation Requirements
4.3.1 Create a Clear Communication Path
4.3.2 Increase the Height of the Antennas
4.3.4 Be Aware of Seasonal Changes
4.4 Installing a Basic Remote Antenna
4.4.1 Weatherproof Remote Antenna Installations
4.4.2 Installing Remote Antennas
4.4.3 Mount a Dome Antenna to the Enclosure
4.4.4 Use an N-Type, Pole-Mounted Antenna
5.1.2 DINFO (Device Information) Menu
5.1.5 DVCFG (Device Configuration) Menu
5.1.6 DERR (Device Error) Menu
5.2 Web-based Configuration for the GatewayPro on DX83
5.2.1 Accessing the Web-based Configuration Screens
5.3 Binding Mode: What does it do?
5.3.1 Automatic Binding Using the Menu Navigation
5.3.2 Bind Radios Using Modbus Commands
5.4 Setting the Network ID in Extended Addressing Mode
5.5 Manually Assign a Binding Code to a Gateway
5.6 Manually Assign a Binding Code to a Node
Sure Cross
®
Performance DX80 Wireless I/O Networks